HH caters for all needs
HH caters for all needs
HH Electronics has developed its TNA line array series for fixed installations and mobile FOH applications
Designed as either a long-throw system or as a standalone, full-range point source system, the TNA line array series from HH Electronics is suited for fixed installations and mobile FOH applications. The TNA-2051 passive line array speaker features dual 5-inch LF drivers and a 1.33-inch Celestion HF compression driver. The outer enclosure comprises integrated rigging hardware to reportedly allow the TNA-2051 to be installed by a single engineer. It has a 65Hz to 20kHz frequency response, a sensitivity of 96dB and a maximum SPL of 124dB.
The TNA-1200S passive line array subwoofer features a 12-inch LF woofer and is equipped with integrated rigging hardware. It offers a max SPL of 125dB and a frequency response as low as 35Hz. When combined with the TNA-2051, the TNA-1200S is said to offer an ideal installation or point source solution for a wide variety of applications, including HOWs.
For venues where the mounting area is limited, HH has developed the 4-inch TNi-C4 ceiling installation loudspeaker with a 70V/100V/8Ω front-facing power tap selector so that output can be adjusted once mounted. The coaxial driver provides a wide frequency response. The spring-loaded connection terminals are said to ensure that cables are tight prior to installing, while the locking dog ear brackets reportedly provide secure mounting. The TNi-C4 is finished in a white ABS surround with a mesh steel grille. The 6.5-inch TNi-C6 and 8-inch TNi-C8 are also available.
The 4-inch TNi-W4 is a satellite wall speaker that features four power taps from 1.5–30W and connects to 70V/100V or 8Ω lines. Equipped with Euroblock and M4 screw input/output terminals, the TNi-W4 comes with a solid steel, multi-angle bracket and its lightweight ABS enclosure reportedly allows manageable handling during installation. It has a frequency response of 80Hz to 20kHz and a 60W RMS power rating. The 6.5-inch TNi-W6 has a frequency response of 65Hz to 20kHz and an 80W RMS power rating, while the 8-inch TNi-W8 has a frequency response of 55Hz to 20kHz and an 80W RMS power rating.
Finally, the TRE-1201 forms part of the Tensor series of portable PAs. The 12-inch active loudspeaker enclosure offers 1,400W of Class-D power output and an SPL of 130dB. Featuring dual ¼-inch and XLR mic/line input channels with individual gain controls, on-board DSP with four audio modes, master volume control, mix output and ground switch, the TRE-1201 has a frequency response of 45Hz to 20kHz. The TRE-1501, meanwhile, is a 15-inch version of the TRE-1201 with an SPL of 131dB.